ANAEROBIC ADHESIVES

Anaerobic adhesives work by completely filling gaps between metal components. Using an anaerobic adhesive prevents loosening from vibration and also protects the joint from corrosion or rust that can result from moisture. They are typically used to augment the seal or holding force of a mechanically joined assembly. Anaerobic Adhesives include threadlockers, thread sealants, retaining materials, and gasket sealants.

 

THREAD LOCKERS

Threadlocker is a reliable way to prevent the release or loosening of thread joints due to mechanical vibrations or environmental factors such as corrosion and temperature fluctuations. Threadlocker is suitable for a range of applications.

Key characteristics of threadlockers

• Single-component

• Clean and easy to apply

• Resists vibration

• Locks and seals all threads

• Reduces inventory costs

 

THREAD SEALING

Anaerobic materials for pipe sealing harden to insoluble plastic fillings and provide protection from leaks. With this type of pipe sealing, anaerobic single-component fillers fill the microscopically small gaps between the interlocking threads and polymerise to a tough solid on contact with metal when air is excluded.

We offer products especially for use with metal and stainless steel, providing a slow-curing seal for readjustment of the connections and a medium strength pipe sealing.

 

BEARING RETAINERS

Retaining Compounds secure bearings, bushes and cylindrical parts into housings or onto shafts. They achieve maximum load transmission capability and uniform stress distribution and eliminate fretting corrosion. Applied as a liquid, they form a 100 % contact between mating metal surfaces, eliminating the need for expensive replacement parts, time consuming machining or the use of mechanical methods.

Advantages of Retaining Compounds as compared to conventional assembly methods:

• High-strength products can carry high loads

• Fill all voids to prevent corrosion and fretting

• 100 % contact – load and stress is distributed evenly over the joint

 

 

GASKETING SEALANTS

 

Gasketing is a sealant between two flanges assembled with screws. The sealant completely fills the space between the flange surfaces, thereby preventing the escape of gaseous or fluid materials in composite machine parts or pipe connections.

• Single-component 

• Fills all voids – no fine surface finish needed 

• No shimming – no need for re-torquing 

• Excellent instant seal

• Permits disassembly

 

SEALANTS

A sealant is a viscous material that changes state to become solid, once applied, and is used to prevent the penetration of air, noise, dust, fire, smoke or liquid from one location through a barrier into another. Typically, sealants are used to close small openings that are difficult to shut with other materials, such as concrete, drywall, etc. Uses of sealants vary widely and sealants are used in many industries, for example, construction, automotive and aerospace industries.

 

Types:

• Silicone Sealants

• Acrylic Sealants

• PU Sealants

• MS Polymer

 

Applications:

• Building and construction joints

• Glazing and connection joints

• Elastic joints in coldstore and container applications

• Sealings in air conditioned systems

 

Characteristics:

• Very easy application

• Permanent clear, UV-resistant

• Stays elastic after curing

• Very good adhesion on many materials

• General sealing for automotive applications

 

 

RUBBER BASE ADHESIVE

Rubber Based Adhesives & Sealants are Single component, room temperature curing, which exhibits high performance, possessing very high adhesive strength and suitable for bonding different substrates.

Rubber based Adhesive & Sealants provides better result with reliable bonds. They are ideal for a wide range of applications serving a broad spectrum of industries such as Automobile, Electronics, Construction, Defence, Bus Body Building, Shipping, Telecommunication & Railways etc.,

Applications

Wood Working Applications For Pipe Jointing Footwear and Leather For Automobiles, Car Interiors /Bus Body For Notebooks/Packaging/Other Paper Converters For Mattresses/Sofa/Chair & Other Furniture

 

POLYURETHANE ADHESIVES

Polyurethane is incredibly versatile and useful engineering material. The versatility of polyurethane means that they can be formulated into a very hard solid to a soft elastomer. Polyurethane compounds offers wide range of viscosity, curing time, pot life, hardness, strength and flexibility and offers unique properties.

Features

Good weather ability. Abrasion resistance.       Wide range of hardness and flexibility.   Excellent mechanical properties.   Excellent chemical resistance.   Good electrical insulating properties.   Fire retardant property.   Bonds similar & dissimilar materials.

 

CYANOACRYLATE ADHESIVES

Cyanoacrylate adhesives are one-part acrylate adhesives that cure instantly on contact with mated surfaces through a reaction with surface moisture. Cyanoacrylates are often called super glues

 

 

EPOXY ADHESIVES

Epoxy adhesives are chemical compounds for joining components. They require clean surfaces and are valued for their toughness and resistance to chemical and environmental damage.

 

Substrate / Material Compatibility:

• Ceramic / Glass

• Concrete / Masonry

• Composites

• Metal

• Paper / Paperboard

 

Application Industry

• Aerospace

• Automotive

• Electronics

• Furniture

• Construction

• Electrical Power / HV

• Marine

  

EPOXY PUTTIES